![]() The ohmmeter should still read that the system’s resistance is within range. Now that all of the components are installed, check that everything is working properly before installing the tile. Good placement of the sensor will keep the thermostat working just like it should. Weave the sensor into the mesh or use hot glue to keep it from moving around. Ensure that the sensor goes between the heating elements and does not overlap them. Once the system is completely laid out and installed, place the sensor for the thermostat. To fit the mat around tricky obstructions like columns and toilets, cut the wire away from the mesh and free form the heating element to fit. ![]() Cut the mesh as needed to fit into the space but be sure not to cut the heating element. Unroll the mat across the subfloor using tape or hot glue to hold the mat in place. One of the easiest steps is actually installing the underfloor heating mats. The cork helps ensure that the heat from the underfloor heating system makes its way to the tile and is not wasted heating the foundation. If the subfloor is concrete, adhere a cork or synthetic cork underlayment to the subfloor before installing the heating system. Remove any nails or sharp objects that can damage the underfloor heating system. Inspect and Clean the Subfloorįor a good installation, the subfloor needs to be clean and free of debris. The resistance should be within 10% of the resistance listed on the tag or in the manual for that model. Using a digital ohmmeter, measure the resistance of the heating wires. ![]() Test the Undertile Heating Matsīefore installation, check that the floor heating system is in good condition. To obtain a quick list of the materials recommended for your radiant floor heating project, check out this instant pricing tool from Warmup.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |